SCULPFUN S30 Ultra-33W Laser Engraving Machine 600x600mm Engraving Area Laser Cutter Automatic Air Assist Replaceable Lens Includes Laser Repair Kit Air Assist M8 Main Board
29
Direct purchase from the factory 
پرداخت امن
هدیه رایگان
سیاست حمل و نقل
سیاست بازگشتهدیه رایگان
به Roymall خوش آمدید، فروشگاه هدیه پریمیوم شما. ما از حمایت شما بسیار سپاسگزاریم و به عنوان تشکر، هدیه رایگان با هر خرید ارائه می دهیم. آماده اید تا مجموعه ما را کاوش کنید؟ محصولات ما را مرور کنید، سفارش خود را ثبت کنید و منتظر هدیه رایگان خود همراه با خرید باشید.سیاست حمل و نقل
سفارشات را ظرف 2 روز پردازش می کنیم.زمان تحویل استاندارد 5-7 روز کاری است.زمان تحویل بسته به مقصد ممکن است متفاوت باشد.1. سیاست بازگشت
ما فقط کالاهای خریداری شده از roymall.com را می پذیریم. هدایای رایگان قابل مرجوع نیستند. کالای مرجوعی باید استفاده نشده و در بسته بندی اصلی باشد.مرجوعی را ظرف 3-5 روز کاری پس از دریافت پردازش می کنیم.کالاهای سفارشی قابل مرجوع نیستند.با ما تماس بگیرید: service@roymall.com یا واتساپ: +86193598494712.سیاست بازپرداخت
پس از دریافت و بررسی کالای مرجوعی، مبلغ کامل به شما بازگردانده می شود. هزینه های حمل و نقل قابل بازگشت نیستند.با ما تماس بگیرید: service@roymall.com یا واتساپ: +8619359849471
Main feature:
1. 600x600mm engraving area: the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.
2. Enhanced 11W, 22W, 33W three laser options: S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and provides 11W/22W/33W three through combined design laser options.
3. Professional safety design: S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
4. One series One structure, easy to upgrade: S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.
5. Tool box, laser repair box, fixed-focus column holder: S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
6. Enhanced 42-bit stepping motor: Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kgu00b7cm (ordinary machines are 3.1 Kgu00b7cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
7. Replaceable protective lens: S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very common and can be easily purchased from SCULPFUN.
8. Built-in high-pressure air-assisted nozzle: S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
9. Upgraded 32-bit air-assisted motherboard: the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
10. Industrial-grade cutting precision: S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
11. Detachable laser eye shield: S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don"t wear glasses. Plus you can easily disassemble it if you don"t need it.
12. Solid and long-lasting frame: The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very long-lasting. The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded.
Product model: SCULPFUN S30 Ultra-33W
Laser information:
Diode laser output power: 33W (note that this is light energy not electrical energy)
Laser focus: 0.08x0.08mm
Laser wavelength 455u00b15nm
Focusing method: fixed focus column + sliding device
Laser protective cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.
Machine information:
Engraving accuracy: 0.005mm
Engraving area size: standard version is 600x600mm
Machine electric power: about 156W
Air pump:
Type: main board controlled air pump, voltage 24V, flow rate 30L/min
Air hose inner diameter: 7.5mm
Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection.
Engravable/cutting material:
Carving materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone
Cutting materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards
Operating software: L1ghtBurn (with air assist function M8), LaserGRBL, L1ghtBurn, Benbox, GrblController, 1teFire, support Windows system, support system. Supported file formats NC, BMP, JPG, PNG, DXF and other picture formats.
Data transmission method: USB connection or Bluetooth wireless connection
Power supply:
Power input: 100-240V AC, 50/60HZ Output: 24V 7A
Package weight: 9.9kg
Packing size: 865*247*235mm
Certification: CE FCC RoHS FDA ICE certification
SCULPFUN S30 Ultra-33W engraving machine packing list:
1u00d7 S30 Ultra 33W laser
1u00d7 laser shield
1u00d7 Laser Repair Kit
1u00d724V automatic air pump
2u00d7460*230*3mm wood board
2u00d7460*230 protective aluminum plate
2u00d7limit switch
1u00d724V 7A power adapter
1 x power cord
1u00d7USB cable
1u00d7 rubber air hose
1u00d7 tool box
1u00d7 laser goggles
Step 1-6 installation package
1u00d7 instruction manual
1u00d7 X-axis assembly
2 x X-profiles
2 x Y profile
1u00d7control box assembly
3u00d7support feet
1x cable clamp bag
1x fixed focus column mount
1x spare screw pack
1x Non-slip seat Pack
Precautions:
u25cfBecause of the powerful laser power, it is forbidden to run the engraving machine without supervision. Stop it if you"re not around.
u25cfDetailed instructions for using the machine, please refer to the instruction manual for parameter settings.
u25cfWhen operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
u25cfDo not touch the laser with your hands, or you may burn your hands.
u25cfPlease avoid strong impact on the machine.
u25cfChildren under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision.
u25cfDo not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser.
1. 600x600mm engraving area: the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.
2. Enhanced 11W, 22W, 33W three laser options: S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and provides 11W/22W/33W three through combined design laser options.
3. Professional safety design: S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
4. One series One structure, easy to upgrade: S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.
5. Tool box, laser repair box, fixed-focus column holder: S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
6. Enhanced 42-bit stepping motor: Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kgu00b7cm (ordinary machines are 3.1 Kgu00b7cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
7. Replaceable protective lens: S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very common and can be easily purchased from SCULPFUN.
8. Built-in high-pressure air-assisted nozzle: S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
9. Upgraded 32-bit air-assisted motherboard: the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
10. Industrial-grade cutting precision: S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
11. Detachable laser eye shield: S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don"t wear glasses. Plus you can easily disassemble it if you don"t need it.
12. Solid and long-lasting frame: The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very long-lasting. The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded.
Product model: SCULPFUN S30 Ultra-33W
Laser information:
Diode laser output power: 33W (note that this is light energy not electrical energy)
Laser focus: 0.08x0.08mm
Laser wavelength 455u00b15nm
Focusing method: fixed focus column + sliding device
Laser protective cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.
Machine information:
Engraving accuracy: 0.005mm
Engraving area size: standard version is 600x600mm
Machine electric power: about 156W
Air pump:
Type: main board controlled air pump, voltage 24V, flow rate 30L/min
Air hose inner diameter: 7.5mm
Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection.
Engravable/cutting material:
Carving materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone
Cutting materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards
Operating software: L1ghtBurn (with air assist function M8), LaserGRBL, L1ghtBurn, Benbox, GrblController, 1teFire, support Windows system, support system. Supported file formats NC, BMP, JPG, PNG, DXF and other picture formats.
Data transmission method: USB connection or Bluetooth wireless connection
Power supply:
Power input: 100-240V AC, 50/60HZ Output: 24V 7A
Package weight: 9.9kg
Packing size: 865*247*235mm
Certification: CE FCC RoHS FDA ICE certification
SCULPFUN S30 Ultra-33W engraving machine packing list:
1u00d7 S30 Ultra 33W laser
1u00d7 laser shield
1u00d7 Laser Repair Kit
1u00d724V automatic air pump
2u00d7460*230*3mm wood board
2u00d7460*230 protective aluminum plate
2u00d7limit switch
1u00d724V 7A power adapter
1 x power cord
1u00d7USB cable
1u00d7 rubber air hose
1u00d7 tool box
1u00d7 laser goggles
Step 1-6 installation package
1u00d7 instruction manual
1u00d7 X-axis assembly
2 x X-profiles
2 x Y profile
1u00d7control box assembly
3u00d7support feet
1x cable clamp bag
1x fixed focus column mount
1x spare screw pack
1x Non-slip seat Pack
Precautions:
u25cfBecause of the powerful laser power, it is forbidden to run the engraving machine without supervision. Stop it if you"re not around.
u25cfDetailed instructions for using the machine, please refer to the instruction manual for parameter settings.
u25cfWhen operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
u25cfDo not touch the laser with your hands, or you may burn your hands.
u25cfPlease avoid strong impact on the machine.
u25cfChildren under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision.
u25cfDo not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser.
